Fountain pens during use can generate some errors that make the user confused. However, this is very difficult to avoid and understanding how to fix common fountain pen errors mentioned in the article below will help you solve the problem in the fastest and simplest way.

 

Error of fountain pen producing too much ink and solution

If your fountain pen produces a lot of ink, you notice that during the writing process, the writing is sometimes bold or blurred on the page. The writing has a phenomenon of dragging on the paper surface, causing the paper to become dirty and ugly. Or sometimes, ink leaks from the tip of the pen and forms drops. At this point, you should immediately think about the situation of ink flowing too quickly from your existing pen and fix it in some basic ways:

– Method 1: Users keep the fountain pen in a cool place

The effect of this is to reduce the heat inside the ink cartridge. The reason is because if the air inside the ink tube is too hot and exceeds the limit, it will expand, creating a thrust that causes the ink in the pen to flow out more than usual. So first, make sure to move the pen to a cool place.

– Method 2: User checks the air gap on the fountain pen nib

If this air gap appears, it means it is not sealed when you check and observe, there is a high possibility of causing a lot of ink to leak out. . Therefore, make sure you carefully consider the gap that may be located between the ink tube and the pen nib to quickly fix it. Please seal them or if not, try replacing the ink cartridge with a new one to see if it fits tightly or not.

– Method 3: The user tightens the nib of the fountain pen

A leaky nib tip can also cause excessive ink flow when writing. Therefore, you should tighten the pen nib by cleaning this part and then letting it dry naturally. Then, you hold the tip of the stinger up to the light and observe. If the light passes through the slits on both sides of the nib, use clean hands to squeeze both sides tightly and keep it there for about 5-10 minutes. To avoid hand pain when doing this, you can use a thin, soft, clean cloth to cover the tip of the pen nib.

– Method 4: Users use new, drier ink

If you have checked and fixed the pen according to the instructions above and still cannot solve the problem, it may be due to the ink. Wet ink will circulate more easily than dry ink, causing more flow. You should change to a new type of ink that is drier to help slow down the ink circulation process, which will solve the problem.

Error of fountain pen having spikes and how to fix it

Pen sting is when you feel a crunching sound in the pen nib when writing. This telltale sign shows that the writing process on paper is not as smooth and soft as usual. If you look closely, you will see the ink imprinted on the page, causing the paper to quickly deteriorate because the fountain pen nib gets caught in the fibers of the writing paper.

The cause of this condition is that the nib head shaft is misaligned or defective. Therefore, to fix it, check the condition of both sides of the nib head shaft to see if there is any misalignment. The manifestation of this error is when the two sides of the pen tip axis are misaligned in a way that is high and low. At this point, you should tighten them up:

– Step 1: Place head Put your finger on the tip of the fountain pen nib and gently press down on the soft surface.

– Step 2: Hold and Do a steady rotation from side to side for about 5 to 10 seconds

– Step 3: Check Check to see if the tip of the nib is no longer misaligned. If so, repeat step 2 as necessary. In case the tip of the nib is bent outward, you just need to turn the pen upside down, place your fingertip on the blade and press lightly and quickly a few times to return to its original state.

In addition, you need to check if the nib is not damaged. This is a case where the tip of the nib on both sides is tight but the writing is still thorny. You need to use a magnifying glass to observe the surface of the tipIs i smooth? If scratches or uneven surfaces are detected, there is a high possibility that the pen tip is damaged. This error requires a new nib. Or another way, you can sharpen the nib in case the fountain pen nib is too sharp. However, this method requires high technique and ingenuity, so consider carefully before doing it.

Error of fountain pen ink flowing unevenly and how to fix it

First, many users reported the unfortunate situation of their pen My machine produces ink irregularly, or even at all, making the writing process very difficult: words are interrupted, words cannot be written…

If you encounter this situation, calmly check to see if the pen nib and reed blade are tight together. If it is tight, the gap line on the tip of the nib must coincide with the ink path of the reed blade. If it doesn’t match, use your hand to gently adjust it.

Besides, if you can’t solve the problem, another way is to check the gap between the two sides of the nib tip to adjust it for a tight fit. In addition, you can change to another type of ink, wet ink to make the circulation process easier, making the ink come out more evenly, making writing more beautiful and easier.

 

Concopens has shared with you common errors in fountain pens and how to fix them. The simplest, most effective, and fastest include:pen pen error</ strong> produces a lot of ink, flows unevenly, and writes with a crunching sound. Although the repair operations are simple, they require a relatively high level of technique, so you need to be skillful, careful, and perform them properly to avoid damaging the product during the repair process.